Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before starting, position your MV Augusta Brutale 1078 upright using the appropriate motorcycle stand, and then run the engine for a few minutes. Begin by unscrewing and removing the lower oil drain plug to allow the engine oil to drain out. Once the oil has drained, re-screw the drain plug, then unscrew and remove the upper refill cap. At this point, unscrew and remove the oil filter, completing the disassembly. To fit the new oil filter, simply screw it into the corresponding housing, and you will have completed the replacement.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Bleed and Replace the Brake Fluid on Mv Agusta Brutale 1078 RR
How to Bleed and Replace the Brake Fluid on Mv Agusta Brutale 1078 RR
Brutale 1078 In this video, you will find instructions to bleed and replace the rear brake fluid on an Mv Agusta Brutale 1078 RR motorcycle. First, remove the rid…
How to Remove the Side Stand on MV Agusta Brutale 1078 RR
How to Remove the Side Stand on MV Agusta Brutale 1078 RR
Brutale 1078 In this tutorial, you will learn how to remove and replace the side stand on an MV Agusta Brutale 1078 RR, following the instructions below. First, p…
How to Change the Engine Oil on a MV Agusta Brutale 1078 R
How to Change the Engine Oil on a MV Agusta Brutale 1078 R
Brutale 1078 In today's tutorial video, you will see how to change the oil and oil filter, performing routine maintenance on the MV Agusta Brutale 1078 R. First, …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos