Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Low Beam Bulb in a Nissan Sentra

Model: Nissan Sentra MK 6, B16 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

This useful guide shows how to replace the low beam bulb in a Nissan Sentra, specific model produced from 2007 to 2012. Begin the procedure by opening the hood of your vehicle. Next, disconnect the bulb connector located near the back of the headlight by pulling the red release tab as shown in the video.

Once done, grasp the bulb and turn it counterclockwise to remove it from its socket. Finally, insert a new bulb and follow the reverse procedure to reassemble everything.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Replace the Low Beam Bulbs in a Nissan Sentra?
How to Replace the Low Beam Bulbs in a Nissan Sentra?
Nissan Sentra (2012-2022 / B17, MK 7) Replacing the low beam bulbs in a Nissan Sentra is an extremely simple and quick task. Let's see how to proceed in this tutorial. Before doing this, …
How to Replace the Headlight Bulb on a Nissan Sentra
How to Replace the Headlight Bulb on a Nissan Sentra
Nissan Sentra (2020-2026 / B18, MK 8) To replace the headlight bulb on your latest model Nissan Sentra, carefully read the following guide and follow the steps described. First, ensure th…
How to replace the headlight bulb of the Nissan Sentra
How to replace the headlight bulb of the Nissan Sentra
Nissan Sentra (2012-2022 / B17, MK 7) Today we will show you the steps to replace the rear headlight bulb of the Nissan Sentra. To perform the replacement, we need to open the trunk and r…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos