Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Bulbs in a Nissan Sentra?

Model: Nissan Sentra B17, MK 7 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the low beam bulbs in a Nissan Sentra is an extremely simple and quick task. Let's see how to proceed in this tutorial.

Before doing this, ensure the key is not in the ignition. Start by opening the hood.

For the left side, remove the intake duct and loosen the indicated bolt with a 10mm socket wrench. Next, lift the rubber cover, remove the large rear cap, and proceed to replace the faulty bulb.

To extract it from the headlight, simply rotate it slightly counterclockwise.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Change the Headlight Bulbs on a Nissan Sentra
How to Change the Headlight Bulbs on a Nissan Sentra
Nissan Sentra (2000-2006 / B15, MK 5) To replace the headlight bulbs on a Nissan Sentra, you need to access the space behind the bulbs in the engine compartment. First, lift the hood and …
How to Change the Low Beam Bulb in a Nissan Sentra
How to Change the Low Beam Bulb in a Nissan Sentra
Nissan Sentra (2007-2012 / MK 6, B16) This useful guide shows how to replace the low beam bulb in a Nissan Sentra, specific model produced from 2007 to 2012. Begin the procedure by openin…
How to replace the front headlight of the Nissan Sentra.
How to replace the front headlight of the Nissan Sentra.
Nissan Sentra (2007-2012 / MK 6, B16) The instructions in this guide will show us how to disassemble and replace the front headlight of the Nissan Sentra. First, let's open the hood of th…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos