Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from a Nissan Leaf

Model: Nissan Leaf ZE0, MK 1 - Years 2010-2017
Part: Front bumper

First, open the front bonnet of the engine compartment. You need to remove the plastic cover located directly above the bumper, at the front of the engine bay. To do this, remove the plastic clips that hold it in place. Now proceed to remove the four clips that secure the top of the bumper. After removing the plastic cover, you can remove three more clips found at the top edge of the bumper, in the space left free by the plastic cover. At this point, unscrew the various screws that secure the bumper. Two are located at the top, at the front edge of the bumper. Nine are at the bottom of the vehicle. Two on each side near the wheels. Now proceed to unclip the bumper from the fixings near the wheel arches and below the headlights, and you're done.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Cabin Fuse Box of the Nissan Leaf 2
Where to Find the Cabin Fuse Box of the Nissan Leaf 2
Nissan Leaf (2018-2025 / MK 2, ZE1) If you don't know where the OBD port of your second-generation Nissan Leaf is located, don't worry because this guide describes all the steps you nee…
Where to Find the Fuse Box on the 2012 Nissan Leaf
Where to Find the Fuse Box on the 2012 Nissan Leaf
Nissan Leaf (2010-2017 / ZE0, MK 1) In this new mini guide dedicated to your 2012 Nissan Leaf, we will discover where the fuse box containing all the various fuses of the vehicle is loc…
How to Replace the Front Wheel on a Nissan Leaf?
How to Replace the Front Wheel on a Nissan Leaf?
Nissan Leaf (2010-2017 / ZE0, MK 1) To replace the front wheel on a Nissan Leaf, position the jack under the bodywork, right next to the wheel to be replaced. Lift the jack until the wh…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos