Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the ignition cylinder of the Nissan Frontier

Model: Nissan Frontier D40 - Years 1997-2021

Today's main instructions will illustrate the procedure for disassembling and replacing the ignition cylinder of the Nissan Frontier. First, we climb aboard the vehicle, on the driver's side, and begin to remove the plastic partition found under the steering wheel; then we unscrew the ignition cylinder screws, disconnecting the various wiring until it is completely removed, as shown in the video. At this point, we carry out the repair or directly replace the ignition cylinder, reassembling everything and then replacing the ignition key (in the case of a new cylinder).

Posted on 31 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on a Nissan Frontier Pickup?
How to Reset the Service on a Nissan Frontier Pickup?
Nissan Frontier (2021-2026 / D41) In this tutorial, you will see how to reset the service on a Nissan Frontier pickup, a very simple and quick operation to perform only after completi…
Where to Find the Fuses on a 2022 Nissan Frontier
Where to Find the Fuses on a 2022 Nissan Frontier
Nissan Frontier (2021-2026 / D41) The box containing all the various fuses in your Nissan Frontier Mk2 (model year 2022) is located under the hood, and with the following guide, you w…
How to Reset the Airbag Light on a Nissan Frontier?
How to Reset the Airbag Light on a Nissan Frontier?
Nissan Frontier (1997-2021 / D40) To reset the airbag light on a Nissan Frontier, insert the ignition key into the ignition switch and turn it clockwise to verify that the light is on…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos