Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Nissan Juke?

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

It will be possible to reset the Service light that is shown on the instrument panel of the Nissan Juke by turning on the instrument panel and turning the key: when the instrument panel is turned on, you will need to hold down the left button located in the center of the instrument panel until the remaining kilometers until the next service are reset.

Then you can press the right button located in the center of the instrument panel, noticing that the maintenance interval has been reset.

To verify that the change has taken place, you will need to turn off and turn on the instrument panel again.


Posted on 20 June 2025 by ScegliAuto


Related tutorials

How to reset the Service light on the Nissan Juke?
How to reset the Service light on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To reset the Service light on the Nissan Juke, turn on the ignition by inserting the key: once the dashboard is powered, press the accelerator pedal …
How to Reset the Service Light in a Nissan Juke?
How to Reset the Service Light in a Nissan Juke?
Nissan Juke (2019-2026 / MK 2) In this tutorial, you will see how to reset the service light in a Nissan Juke, a very simple and quick operation, to be performed only after complet…
How to reset the Service light on the Nissan Juke?
How to reset the Service light on the Nissan Juke?
Nissan Juke (2019-2026 / MK 2) To reset the Service light on the Nissan Juke, turn on the ignition and then navigate through the menu using the directional controls on the left sid…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos