Do it yourself
Frequently asked questions about cars and motorcycles

Where is and how to reach the fuse box of a Nissan 240Z?

Model: Nissan Nissan Various
Part: Fuse box

This video is currently unavailable

The fuse box of a Nissan 240Z is located inside the engine compartment, positioned on the driver's side, near the inner fender or firewall. To access it, open the hood by pulling the release lever located inside the cabin, usually under the dashboard, and make sure to secure it in place with the support rod. Once the hood is open, locate a small rectangular box with a plastic cover.

This is the fuse container. The cover of the box can be removed by gently pulling it, being careful not to damage the fastening hooks.

On the back of the cover, you will find a diagram that identifies the function of each fuse, making it easier to locate the one you need to check or replace. Before replacing a fuse, always make sure that the vehicle is turned off to avoid short circuits or damage to the electrical system.

Use pliers to remove the faulty fuse and replace it with one of the same amperage. After replacement, close the cover of the box and check that all systems are functioning properly.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

Nissan Nissan Various This brief guide shows the diagrams of the fuse boxes found in a Nissan AD, produced from 1999 to 2006. The video accurately displays the position, n…
Nissan Nissan Various In today’s video, we can see all the fuse diagrams for a Nissan Xterra, a second-generation model produced from 2005 to 2015. The diagrams show the p…
Nissan Nissan Various The Nissan Xterra produced from 2005 to 2014 contains two fuse boxes. The first fuse box is located inside the cabin, specifically behind the passeng…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos