Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in a Nissan Juke

Model: Nissan Juke MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

In this video tutorial, you can observe the steps to follow to reset the service light in a Nissan Juke car. First, get inside the vehicle, insert the key, and turn it to the ON position, thus turning on the instrument panel without starting the engine.

Press the menu button next to the odometer, then scroll through the options in the settings and select "maintenance interval" or "service"; at this point, hold down the "reset" button for about three to five seconds until you see a message on the display saying "reset completed" or "interval reset." Turn off and turn on the panel again to check that the light has disappeared.


Posted on 12 January 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Nissan Juke?
How to reset the Service light on the Nissan Juke?
Nissan Juke (2019-2026 / MK 2) To reset the Service light on the Nissan Juke, turn on the ignition and then navigate through the menu using the directional controls on the left sid…
How to Reset the Service Light on a Nissan Juke
How to Reset the Service Light on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To reset the Service light on a Nissan Juke, insert the ignition key into the ignition barrel and turn it to switch on the instrument cluster: once i…
How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) The following video tutorial shows how to reset the service light on a Nissan Juke independently. If the light does not reset, a visit to the garage …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos