Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Light on the Nissan Navara?

Model: Nissan Navara D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: AdBlue warning light

See other generations:
Video tutorial

The anti-pollution additive used in modern vehicles equipped with a diesel engine, called AdBlue, is stored in a dedicated tank, which indicates, via the level sensor, when it has reached the reserve point and needs to be topped up. After the mentioned top-up, this warning should turn off automatically, but if it does not, you need to go to a service centre and, using a diagnostic electronic device connected to the ECU through the vehicle's OBD port, perform the reset.


Posted on 26 September 2026 by ScegliAuto


Related tutorials

How to Check the AdBlue Level and Reset the Warning Light on the Nissan Navara
How to Check the AdBlue Level and Reset the Warning Light on the Nissan Navara
Nissan Navara (2014-2024 / D23) Today's main information will show you how to check the AdBlue fluid level and how to reset the refill warning on the Nissan Navara. First, get insid…
How to Reset the AdBlue Warning Light on a Nissan Navara?
How to Reset the AdBlue Warning Light on a Nissan Navara?
Nissan Navara (2014-2024 / D23) To reset the AdBlue warning light on a Nissan Navara, top up with the necessary amount of additive liquid: this should be added to the tank with the …
How to Refill AdBlue in the Nissan Navara
How to Refill AdBlue in the Nissan Navara
Nissan Navara (2014-2024 / D23) The AdBlue in your Nissan Navara (as in all recent Diesel vehicles) plays an important role in reducing the pollution level of exhaust gases. For thi…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos