Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J10
- Years 2006-2014 Replacing the exterior rear-view mirror on Nissan Qashqai is a rather cumbersome operation, this is because the power connector is located behind the door panel so to disconnect it you will first have to remove it. In the internal door handle there will be a cover that must be removed by levering with a flat screwdriver or with a plastic lever, this will give access to two bolts that must be unscrewed. Once the two bolts have been unscrewed, it will be possible to remove the panel by levering along the perimeter of the same in order to release all the plastic clips. After releasing all the clips, paying attention to the handle, simply lift the panel to detach it from the car, this will give access to the main power connector located behind the panel which can then be disconnected allowing the panel to be removed. At this point you will finally have access to the power connector of the mirror recognizable by the cable coming from it, therefore, once the latter has also been disconnected, you can proceed with the final disassembly. The mirror will be fixed to the car by means of three bolts hidden behind the plastic cover located in the direction of the mirror itself, this will be fixed by interlocking and it will be enough to do a little lever to remove it and thus be able to unscrew the three bolts. After unscrewing the three bolts, the mirror should come off easily from the car and it will therefore be possible to insert the new one and then complete the work by reassembling everything in the reverse order to that of disassembly.
Posted on 5 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.034
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |