Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : Replace the starter motor on the Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K11 - Years 1992-2002
Part: Starter motor
Operation: Replace the starter motor on the Micra

Replace the ignition motor of the Nissan Micra? We open and lift the front hood to access the starter motor. We disconnect the terminals of the starter motor power supply with pliers or screwdriver depending on the pressure of the tabs, unscrew the locking pins of the starter motor with a socket wrench and remove it from the engine compartment (we access from below in case of little space from inside the engine compartment). We assemble the new ignition motor with the connection of the power supply cables and with the attached tightening screws. We test the correct functioning when starting the engine.


Posted on 25 December 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Micra 2002-2010 - Position of the starter motor on a Nissan Micra K12? Read Answer
    • Micra 2002-2010 - Where is the starter motor located in the 2005 Nissan Micra? Read Answer
    • Micra 2002-2010 - Why won't my Nissan Micra K12 start? Read Answer
    • Micra 1992-2002 - Where is the starter motor located in the Nissan Micra 1.3? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos