Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from a Nissan NV200

Model: Nissan Nv200 MK 1 - Years 2009-2024
Part: Starter motor

The starter motor of the 2018 Nissan NV200 is located under the front bonnet beneath the air filter box. To access and remove the starter motor, you need to unscrew the nut that secures the air filter box bracket. After disconnecting the connector and the air duct, unscrew the rear screw on the clamp, and remove the box. To remove the starter motor, unscrew the two bolts that secure the starter using a T19 socket. Once the nuts are removed, you can extract the part and proceed with the replacement by inserting the new part in reverse.

Posted on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the starter motor located in the Nissan NV200 van?
Nissan Nv200 (2009-2024 / MK 1) In this video we can see where the starter motor is located in the Nissan NV200 van and how to proceed in case we need to replace it, a very simple o…
Where to Find the OBD Port of the Nissan NV200
Where to Find the OBD Port of the Nissan NV200
Nissan Nv200 (2009-2024 / MK 1) To locate the OBD port inside your Nissan NV200, carefully follow these simple instructions. First, park your Nissan NV200 safely and ensure it is co…
Resetting the service light on the Nissan NV200
Resetting the service light on the Nissan NV200
Nissan Nv200 (2009-2024 / MK 1) Following these simple steps, we will see how to reset the service light for the regular maintenance of the engine oil change in the Nissan NV200. Fi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos