Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan from a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

Before you begin, open the front passenger door of your Nissan Qashqai. The cabin fan is located under the right side of the dashboard.

Start by unscrewing the small bolt that secures the electrical connector powering the fan, then disconnect the connector. Next, unscrew and remove the bolts that secure the cabin fan to its housing.

Once this step is complete, you can remove the cabin fan, successfully finishing the disassembly.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan in a Nissan Qashqai?
How to Remove the Cabin Fan in a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) In this tutorial, you will see the location of the cabin fan in the Nissan Qashqai J10 and how to remove it, a very simple operation. It is located a…
Removing the Internal Fan on a Nissan Qashqai
Removing the Internal Fan on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Remove the internal air fan from a Nissan Qashqai. Locate the fan under the dashboard on the lower right. Remove the cover from under the dashboard. …
How to Replace the Cooling Fan on a Nissan Qashqai?
How to Replace the Cooling Fan on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To replace the radiator fan on a Nissan Qashqai, open the bonnet to access the components inside the engine bay: at the front, you will find a plasti…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos