Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to disassemble the cabin fan in Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Interior blower
Operation: How to disassemble the cabin fan in Nissan Qashqai?

In this tutorial we can see the location of the cabin fan in the Nissan Qashqai J10 and how to disassemble it, a very simple operation. It is located in the lower part of the dashboard on the driver's side, precisely at the end of the joint with the central tunnel. To disassemble it, we will first have to remove the lower panel of the dashboard and then the accelerator pedal, in order to create more work space. Once this is done, we can disconnect the power connector of the fan, rotate it counterclockwise and remove it from the housing.


Posted on 1 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2006-2014 - What is the problem with the heater fan on Nissan Qashqai from 2088 onwards? Read Answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai cabin fan located? Read Answer
    • Qashqai 2006-2014 - Where is the interior fan located on Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why does the fan of the Nissan Qashqai not turn off? Read Answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai's cabin fan not working? Read Answer
    • Qashqai 2014-2022 - What is the noise emitted by the Nissan Qashqai fan due to? Read Answer
    • Qashqai 2014-2022 - Where is the heating fan located on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the interior fan on Nissan Qashqai Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos