Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the heater fan of the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

The position of the cabin heating fan, in this specific case we are talking about the Nissan Qashqai j10, is not very convenient to reach. In fact, disassembly is quite complex to perform, but not impossible, it is just a matter of knowing exactly what to do. For the aforementioned disassembly, we must remove the left covering of the central tunnel, then lift the protective grille of the fan and finally extract it from its housing, behind the aforementioned tunnel.

To completely free it, all that remains is to disconnect the power cable connector.


Posted on 2 August 2025 by ScegliAuto


Related tutorials

How do you replace the cabin fan resistor of the Nissan Qashqai?
How do you replace the cabin fan resistor of the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To replace the cabin fan resistor of the Nissan Qashqai, you need to open the glove compartment located on the passenger side: once it has been remov…
How to Remove the Cabin Fan from a Nissan Qashqai
How to Remove the Cabin Fan from a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before you begin, open the front passenger door of your Nissan Qashqai. The cabin fan is located under the right side of the dashboard. Start by unsc…
Removing the Internal Fan on a Nissan Qashqai
Removing the Internal Fan on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Remove the internal air fan from a Nissan Qashqai. Locate the fan under the dashboard on the lower right. Remove the cover from under the dashboard. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos