Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the cabin fan resistor of the Nissan Qashqai?

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Blower motor

To replace the cabin fan resistor of the Nissan Qashqai, you need to open the glove compartment located on the passenger side: once it has been removed from its seat, you will be able to locate the fan and its resistor at the back. You will need to disconnect the appropriate cables and remove the old resistor from its housing: in doing so, you can insert the new one in its place so that you can then reassemble the glove compartment and check that everything is working properly.

Posted on 20 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2006-2014 / J10) First, locate the motor, which is situated behind the glove compartment in front of the front passenger seat. Remove the glove compartment to access …
Nissan Qashqai (2006-2014 / J10) In this tutorial, you will see the location of the cabin fan in the Nissan Qashqai J10 and how to remove it, a very simple operation. It is located a…
Nissan Qashqai (2014-2022 / J11) Before you can start, lift the rear of your Nissan Qashqai. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos