Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Nissan Qashqai 1 Interior Fan Resistor Replacement 1

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Interior blower
Operation: Nissan Qashqai 1 Interior Fan Resistor Replacement 1

Let's see in this video tutorial how to remove and replace the passenger compartment fan resistor on a Nissan Qashqai first series, in simple steps. First of all we get on board the car and we go to remove the plastic side bulkhead that we find near the pedals; then we are going to unscrew the fixing screws of our passenger compartment fan resistor, which we find near the passenger compartment air filter. Once disconnected, let's replace it with the new one, connecting it and fixing it with the screws. So we just have to check the operation of the air conditioner!


Posted on 29 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - What is the problem with the heater fan on Nissan Qashqai from 2088 onwards? Read Answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai cabin fan located? Read Answer
    • Qashqai 2006-2014 - Where is the interior fan located on Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why does the fan of the Nissan Qashqai not turn off? Read Answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai's cabin fan not working? Read Answer
    • Qashqai 2014-2022 - What is the noise emitted by the Nissan Qashqai fan due to? Read Answer
    • Qashqai 2014-2022 - Where is the heating fan located on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the interior fan on Nissan Qashqai Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos