Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Heating Fan of the Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Blower motor

First, locate the motor, which is situated behind the glove compartment in front of the front passenger seat. Remove the glove compartment to access the area where the motor and resistor are located. First, extract the resistor if it needs replacing, found on the left side, while the motor is positioned more centrally at the top. Remove the bolts securing it and proceed with the necessary replacements. Reverse the steps for reassembly.

Updated on 25 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Cabin Fan from a Nissan Qashqai
How to Remove the Cabin Fan from a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before you begin, open the front passenger door of your Nissan Qashqai. The cabin fan is located under the right side of the dashboard. Start by unsc…
How do you remove the heater fan of the Nissan Qashqai?
How do you remove the heater fan of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) The position of the cabin heating fan, in this specific case we are talking about the Nissan Qashqai j10, is not very convenient to reach. In fact, d…
How do you replace the cabin fan resistor of the Nissan Qashqai?
How do you replace the cabin fan resistor of the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To replace the cabin fan resistor of the Nissan Qashqai, you need to open the glove compartment located on the passenger side: once it has been remov…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos