Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to reset the Nissan Micra service light

Nissan Micra - Video tutorial

Model: Nissan Micra K14 - Years 2017-2024
Part: -board computer
Operation: How to reset the Nissan Micra service light

If the maintenance warning light on your Nissan Micra continues to illuminate at every start then you must necessarily perform a manual reset. If you don't know how to do it, don't worry because in the following guide you will find all the necessary information. Go inside the car and close all the doors. Insert the key and turn on the ignition. Then press the "OK" button located on the left side of the steering wheel and scroll through the menu until you find the "Maintenance" option. Select it, enter the first option and click on "Reset". Confirm the operation when prompted and shortly after you are done.


Posted on 30 April 2024 by ScegliAuto



How to reset the service light on the Nissan Micra
Nissan Micra (2002-2010 / K12) To reset the service light of a Nissan Micra, also known as the service indicator, we must first perform the car service and only then reset the ligh
How do you reset the Service light on the Nissan Micra?
Nissan Micra (2010-2017 / K13) The reset of the Service light on the Nissan Micra is done by turning on the instrument panel and rotating the special key inside the ignition switch
How do you reset the Service light on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To reset the Service light of the Nissan Micra, you need to turn on the instrument panel so that you can access the menu on the radio display: here y

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos