Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform an Oil Change on a Nissan Sunny

Model: Nissan Sunny N17 - Years 2011-2020
Part: Engine oil

Below, you will find a short and simple guide on how to perform routine maintenance by changing the engine oil and oil filter on the Nissan Sunny. First, lift the vehicle and start unscrewing the oil drain bolt located on the oil pan using a socket wrench; let the oil drain into a container for about ten minutes. At this point, unscrew and remove the oil filter using the appropriate tool; replace the cartridge with a new one, hand-tightening it gently, and finally pour in the engine oil!

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Pan on a Nissan Sunny
How to Replace the Oil Pan on a Nissan Sunny
Nissan Sunny (2011-2020 / N17) To replace the engine oil pan on a 2020 Nissan Sunny, first, for safety, disconnect the negative terminal of the battery. Then, position the vehicle …
How to Replace the Air Filter on a Nissan Sunny
How to Replace the Air Filter on a Nissan Sunny
Nissan Sunny (1990-2000 / B13) The air filter is one of the most important components in the engine compartment of your Nissan Sunny. Here’s how to replace it with a simple procedu…
How to Replace the Serpentine Belt on a Nissan Sunny?
How to Replace the Serpentine Belt on a Nissan Sunny?
Nissan Sunny (2011-2020 / N17) To replace the serpentine belt on a Nissan Sunny, open the hood to access the belt from the bottom of the engine compartment. The belt is located nea…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos