Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Rogue Sport
  6. : How to disassemble the rear lights in the Nissan Rogue Sport?

Nissan Rogue Sport - Video tutorial

Model: Nissan Rogue Sport MK 1 - Years 2017-2024
Part: Tail light
Operation: How to disassemble the rear lights in the Nissan Rogue Sport?

In this tutorial we can see how to disassemble the rear lights on your Nissan Rogue Sport, so that you can replace a faulty bulb or the light itself. Before we begin, make sure the vehicle is turned off and get both a 10mm socket wrench and a large flat-blade screwdriver. Let's start by opening the tailgate, then unscrew the two headlight fixing bolts located along the inner edge. Once this is done, we extract the headlight from the body by pulling it towards us and, if necessary, levering it with the screwdriver. Finally, we proceed with the replacement of the damaged element.


Posted on 17 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos