Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Nissan Tiida Versa

Model: Nissan Tiida Versa C12 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

In this video tutorial, the steps to reset the maintenance light on a Nissan Tiida Versa are shown. The procedure is always fairly quick.

First, get in the vehicle and turn on the ignition by inserting the key into the slot and turning it to the first position without starting the engine. Next, turn off the ignition and then turn it back on while holding down the button located on the right near the vehicle display; keep pressing the button until the odometer blinks.

Release the button, then press it multiple times to reset the odometer until you see the "oil good" message appear. The operation will then be complete.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Nissan Tiida
How to Reset the Service Light on a Nissan Tiida
Nissan Tiida Versa (2011-2018 / C12) In this video, you will learn how to reset the service light on a Nissan Tiida Versa. First, turn on the ignition without starting the engine. Then, …
How to Remove the Car Radio in the Nissan Tiida Versa
How to Remove the Car Radio in the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) In today's video, you will see how to remove the car radio in the Nissan Tiida Versa. First, gather a flathead screwdriver and a Phillips screwdriver…
How to Remove the Radio from the Nissan Tiida Versa
How to Remove the Radio from the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) Today, you will learn how to remove the factory radio from the Nissan Tiida Versa by following the instructions below. First, get inside the vehicle …

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos