Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Rogue
    4. : How to reset Nissan Rogue oil warning light

Nissan Rogue - Video tutorial

Model: Nissan Rogue S35 - Years 2008-2015
Part: -board computer
Operation: How to reset Nissan Rogue oil warning light

Do you want to permanently delete the oil warning light from the display of your Nissan Rogue but you do not know how to do it or are you afraid of making some mistakes? Don't worry because you just need to follow the instructions in this mini guide to the letter to be able to do everything in the best possible way and without consequences. First insert the key and turn on the ignition. Then locate the button located below the speedometer and press it several times until "Settings" appears on the display. At this point, hold it down for three seconds and enter the secret menu. All that remains is to rotate the button clockwise, go to "Maintenance" and then to "Reset". Finally, turn off the picture.


Posted on 23 August 2022 by ScegliAuto



How to reset the oil warning light on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) In this video we will see how to reset the maintenance warning light of a Nissan Rogue produced from 2014 to 2020. To start we need to turn on the in
How to reset the oil light on the 2020 Nissan Rogue
Nissan Rogue (2014-2020 / T32) If the alarm light for the oil change on your 2020 Nissan Rogue continues to stay on even after it has been recently replaced, do not worry because w
How to reset the service light on Nissan Rogue
Nissan Rogue (2014-2020 / T32) In this video tutorial you can see how you can reset the service warning light on Nissan Rogue, following a few simple steps that will guide you towa

    Frequently Asked Questions

    • Rogue 2014-2020 - Why did the Nissan Rogue display stop working? Read Answer
    • Rogue 2014-2020 - What to do when the touch screen of the Nissan Rogue does not work? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos