Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Conditioning Dryer in a Nissan Altima

Model: Nissan Altima L32 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Air conditioning

See other generations:
Video tutorial

The air conditioning dryer in your car plays an important role by filtering out pollutants and dirt particles, so it must be replaced regularly. First, remove the front grille by taking off the four clips on top and disengaging the plastic fasteners, starting with the side ones and then moving to those at the bottom of the grille.

Disconnect the battery and then the pressure sensor connector. Now you can free and remove the dryer filter located next to the condenser.

To reinstall it, simply follow the reverse procedure.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Activate the Air Conditioning in the Nissan Altima
How to Activate the Air Conditioning in the Nissan Altima
Nissan Altima (2018-2026 / L34) Activating the air conditioning in your car is a simple task that you can control directly from the buttons on the dashboard. First, press the Start …
Where are the fuses located in the Nissan Altima?
Where are the fuses located in the Nissan Altima?
Nissan Altima (2013-2018 / L33) In the Nissan Altima, the fuses are divided among three fuse boxes located inside the vehicle. The first is installed in the cabin, behind the plasti…
Where are the fuses located in the Nissan Altima?
Where are the fuses located in the Nissan Altima?
Nissan Altima (2007-2012 / L32) The fuses in the Nissan Altima are located inside the designated fuse boxes within the vehicle. This model has two: the first is located at the lower…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos