Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on a Nissan Titan

Model: Nissan Titan MK 1 - Years 2003-2015
Part: Shocks

To replace the front shock absorber on a Nissan Titan, lift the vehicle using a lift or jack so that the wheel corresponding to the shock absorber being replaced is not in contact with the ground. Then, remove the bolts that secure the wheel to the hub: this will provide access to the shock absorber, which must be freed from its housing by removing the bolts that secure it at the top and bottom. Once the old shock absorber is removed, install the new one and reassemble all the components that were removed.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlights on the Nissan Titan
Replacing the Headlights on the Nissan Titan
Nissan Titan (2003-2015 / MK 1) Follow these instructions to remove and replace the headlights on the Nissan Titan. First, open the hood and start by removing the front bumper grill…
Where is the fuse box located in the 2004 Nissan Titan?
Where is the fuse box located in the 2004 Nissan Titan?
Nissan Titan (2003-2015 / MK 1) The 2004 Nissan Titan has two fuse boxes inside. The first fuse box is located inside the front hood, next to the battery. The second fuse box is loc…
How to Remove the Front Headlight of the Nissan Titan?
How to Remove the Front Headlight of the Nissan Titan?
Nissan Titan (2003-2015 / MK 1) To remove the front headlight of the Nissan Titan, open the hood to access the clips and rivets securing the grille at the front of the vehicle. Once…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos