Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Daytime Running Lights (DRL) on Nissan Magnite

Model: Nissan Magnite MK 1, DD0 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

As shown in the video, you can install daytime running lights (DRL) on the Nissan Magnite. Purchase the DRL (you can also do this online through major retailers for about $40) and then use a CD marker to mark the exact length of the DRL corresponding to your front headlights.

Stick your DRL at the top of the lights as shown in the video and you can finish it off with tape for a more polished look. At this point, you need to make the electrical connections.

There are three wires: connect the yellow and black wires to the upper connector visible from above, and the red wire to the lower one.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Install a New Antenna on a Nissan Magnite
How to Install a New Antenna on a Nissan Magnite
Nissan Magnite (2020-2026 / MK 1, DD0) In this guide, you will find instructions on how to install a new antenna on a Nissan Magnite by following these simple steps. There are two methods …
How to Install a Decorative Plate on the Back of the Nissan Magnite
How to Install a Decorative Plate on the Back of the Nissan Magnite
Nissan Magnite (2020-2026 / MK 1, DD0) Learn how to install a beautiful decorative skid plate on the back of your Nissan Magnite. On a Chinese e-commerce site, you can find this decorative…
How to Replace the Radio in a Nissan Magnite
How to Replace the Radio in a Nissan Magnite
Nissan Magnite (2020-2026 / MK 1, DD0) To replace the radio in a Nissan Magnite, use a tool to pry off the trim that surrounds the radio and runs along the dashboard. Once this trim is rem…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos