Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Removing the door panel on this car model is very easy as it is secured by only two screws and pressure clips around the edge. The two securing screws are located beneath the trim of the internal handle, which must be removed.

Once the screws are undone, remove the handle support complete with the frame around the opening lever. Then disconnect the window switch by unplugging the corresponding connector.

At this point, you can pry along the edge to release the pressure clips.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to remove the front door panel of the Nissan Qashqai
How to remove the front door panel of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Following these simple steps, we will see how to disassemble and replace the front door panel of the Nissan Qashqai. First, open the front door of th…
How to Remove the Rear Door Panel on the Nissan Qashqai?
How to Remove the Rear Door Panel on the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) The rear door panel on the Nissan Qashqai has no fixing screws. To remove it, use an object to leverage the various plastic parts that make up the pa…
How to Remove the Door Panel on a Nissan Qashqai?
How to Remove the Door Panel on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) Removing the door panel on a Nissan Qashqai is very simple. For this operation, you will need a plastic trim tool for removing the inserts and a 10 m…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos