Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. X Trail
    4. : Side mirror

Nissan X Trail - Side mirror

Side Mirror Nissan X Trail (2001-2006 / mk 1, t 30)

Nissan X Trail (2001-2006 / MK 1, T30)
How to Remove the External Wing Mirror on a Nissan X-Trail
In today's tutorial, you will see the steps to remove and replace the external wing mirror on a Nissan X-Trail. First, open the front door and start removing …Read all…
Posted on 9 July 2026 by ScegliAuto
Nissan X Trail (2001-2006 / MK 1, T30)
How to Remove the External Rear-View Mirror on Nissan X-Trail T30
Below are the instructions for removing the external rear-view mirror on a Nissan X-Trail T30, first series. First, open the front door on the affected side …Read all…
Posted on 9 May 2026 by ScegliAuto
Airbag (1) Speaker (1) Shocks (2) Car stereo (3) Roof rack bars (1) Battery (2) Spark plugs (1) Glow plugs (1) Control unit (2) Key (12) Timing belt (4) Onboard computer (3) Checks and maintenance (7) Dashboard (2) Differential (1) Tail light (5) Air filter (5) Cabin air filter (6) Fuel filter (1) Diesel fuel filter (5) Light bulb (1) Headlight bulb (1) Tail light bulb (3) License plate light (1) Clock (3) Front bumper (1) Brake pads (2) Shift knob (1) Fuel pump (6) Instrument cluster (4) Wheel (2) Fuse box (34) Seat (2) Side mirror (2) Warning light – error code (6) (6) Tire pressure warning light (1) Service warning light (42) Windshield wipers (3) Tie rods (1) EGR valve (2) Blower motor (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos