Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light and Bulbs on the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

Today's instructions will show you how to remove and replace the rear light and its bulbs on the Opel Mokka. First, open the boot lid and start removing the side plastic cover; then, unscrew the fixing screws of the light and disconnect the electrical connector of the bulbs to remove it, as shown in the video.

At this point, separate the bulb holder from the housing if you want to replace the bulbs of the light; then install the rear light, applying the reverse procedure of disassembly!


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on an Opel Mokka
How to Replace the Rear Light Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you how to remove and replace the rear light bulbs on an Opel Mokka, following the instructions below. First, open the boot l…
Replacing the rear indicator bulb on the Opel Mokka
Replacing the rear indicator bulb on the Opel Mokka
Vauxhall Mokka (2020-2026 / Mokka B) If the bulb of the rear indicator light burns out, you must replace it as soon as possible for your safety and to avoid a fine. To do this, open the …
How to Replace the Rear Wiper Blade of an Opel Mokka
How to Replace the Rear Wiper Blade of an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) How to replace the rear wiper blade? Follow these steps to replace the rear wiper blade of an Opel Mokka: take the rear blade in your hands, pull it …

How to Remove the Front Bumper on a Citroen C4 Picasso?

In this tutorial, see how to replace the front bumper on a Citroen C4 Picasso, a very simple and quick operation. First, open the bonnet, then locate the rivets on the upper edge of the grille and, using a flat-head screwdriver, remove them. Next, move underneath the bumper, unscrew all the fixing bolts, and proceed to remove the last screws, accessible from inside the wheel arches. At this point, grasp the bumper from one of the two ends, pull it outwards, and separate it from the chassis.

Watch the video!


by ScegliAuto

More videos