Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2019 Opel Crossland X

Model: Vauxhall Crossland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

Today, you will learn the steps to reset the service light on the 2019 Opel Crossland X. The steps to follow are four: -press the button with the spanner symbol located on the left side of the instrument cluster display; -simultaneously turn on the ignition; -hold the button until the countdown ends; -release the button; Wait a few seconds and to complete the reset of the service light, switch off and then on the ignition.

If the light comes back on, take the vehicle to a garage for a diagnostic check to resolve the issue.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Opel Crossland X
How to Reset the Service Light on the Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) The service light reset on the Opel Grandland X must be performed after all servicing operations, including engine oil and oil filter replacement, ai…
How to Reset the Oil Warning Light on the Opel Crossland X
How to Reset the Oil Warning Light on the Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) Resetting the oil warning light on the 2017 Opel Crossland X is a very simple operation that can be done in a few minutes. Start the reset by pressin…
How to Reset the Tyre Pressure Light on an Opel Crossland
Vauxhall Crossland X (2017-2024 / MK 1) In this very short tutorial video today, we will see how to reset the tyre pressure light on an Opel Crossland, model produced from 2017 onwards. Bef…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos