Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Main Beam on a 2018 Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

If one of the main beams on your 2018 Opel Mokka has a malfunction and you want to learn how to replace it correctly, follow these steps. First, lift the front bonnet of the car and remove the dust cover located at the back of the headlamp.

Once the cover is removed, you can proceed to detach the bulb holder. Finally, replace the faulty bulb with a new one of the same type and correctly reassemble the bulb holder along with the protective cover.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

How to replace the high beam bulb of the Opel Mokka 2014
How to replace the high beam bulb of the Opel Mokka 2014
Vauxhall Mokka (2012-2019 / Mokka A) If you are planning to replace the high beam bulb of your Opel Mokka first edition (year 2014), but you do not know how to perform the operation in q…
How to Replace the Front Headlight Bulbs on an Opel Mokka
How to Replace the Front Headlight Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboar…
How to Replace the Rear Light Bulbs on an Opel Mokka
How to Replace the Rear Light Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you how to remove and replace the rear light bulbs on an Opel Mokka, following the instructions below. First, open the boot l…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos