Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the high beam bulb of the Opel Mokka 2014

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Headlight bulb

If you are planning to replace the high beam bulb of your Opel Mokka first edition (year 2014), but you do not know how to perform the operation in question, then all you have to do is read the following guide and follow all the steps. First of all, lift the front hood of the vehicle completely and make sure that the engine compartment is not hot, then proceed with the removal of the rubber cap located in the rear area of the headlight. Next, remove the bulb holder and replace the faulty bulb with the new one.

Posted on 19 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Side Indicator on a 2014 Opel Mokka
How to Replace the Side Indicator on a 2014 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) To replace the side indicator on your 2014 Opel Mokka A, follow these simple steps. First, turn off the car and position yourself in front of the ind…
How to Replace the Number Plate Bulbs or LEDs on Opel Mokka
How to Replace the Number Plate Bulbs or LEDs on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Learn how to replace the number plate light bulbs or LEDs on an Opel Mokka. Start by opening the boot lid, then use a lever to detach the plastic lig…
How to replace the side indicator bulb of the Opel Mokka X
How to replace the side indicator bulb of the Opel Mokka X
Vauxhall Mokka (2020-2026 / Mokka B) Replacing the side indicator bulb of your Opel Mokka X is really simple and to complete the operation, you just need to follow all the steps describe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos