Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Mokka
    4. : How to replace the front headlight bulb of the Opel Mokka A.

Vauxhall Mokka - Video tutorial

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Opel Mokka A.

If one of the bulbs in the front headlight of your Opel Mokka A (year 2012-2019) has stopped working and you want to find out how to replace it correctly, then all you have to do is follow the following procedure. First, safely park your Opel Mokka and make sure it is completely turned off. Immediately after, lift the front hood, secure it with the safety arm, and remove the protective cap located inside the headlight. Finally, also remove the bulb holder and proceed with replacing the faulty bulb with a new one.


Posted on 24 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Mokka 2012-2019 - How much does it cost to replace the Opel Mokka headlight bulb? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos