Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Position Bulb on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Headlight bulb

Today, you will see the instructions to remove and replace the position bulb of the front headlight on a first series Opel Mokka. First, open the bonnet of your car and turn the bulb's electrical connector to the left to remove the bulb holder along with the bulb itself. Next, remove the old bulb and replace it with the correct new one; then insert it in the correct orientation and refit the bulb holder into the headlight, turning it to the right.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp Bulbs on an Opel Mokka
How to Remove the Front Headlamp Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Here’s how to remove and replace the front headlamp bulbs on an Opel Mokka: open the front bonnet by pulling the lever located at the bottom right of…
How to Replace the Front Headlight Bulbs on an Opel Mokka
How to Replace the Front Headlight Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboar…
Replacement of the front headlight bulb of the Opel Mokka
Replacement of the front headlight bulb of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's instructions will show us how to disassemble and replace the headlight bulb of the Opel Mokka, in simple steps. First, we open the hood and s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos