Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the dipped beam bulb on Opel Mokka MK1

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Headlight

In this video, we will see how to replace the low beam headlight bulb on an Opel Mokka MK1: we open the front hood; we have enough space to reach behind the headlight unit and remove the rubber cap that protects the bulbs from moisture, unscrewing it counterclockwise; we remove the electrical connector and extract the old bulb that we find inside the headlight: we replace it with an approved LED bulb, being careful not to touch it with bare hands. We put it back in place inside the headlight unit and reconnect the electrical connector. Now we can put the rubber cap back in place by turning it clockwise. We repeat the process on the other side.

Posted on 2 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Opel Mokka.
How to replace the headlight bulb of the Opel Mokka.
Vauxhall Mokka (2012-2019 / Mokka A) Let's briefly review the instructions on how to disassemble and replace the headlight bulb of the Opel Mokka. First, let's open the vehicle's hood an…
How to Replace the Front Headlamp Bulbs on an Opel Mokka
How to Replace the Front Headlamp Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today, we will see in this video tutorial how to remove and replace the front headlamp bulbs on the Opel Mokka. First, open the bonnet of your car an…
Replacing the Front Headlight Position Bulb on an Opel Mokka
Replacing the Front Headlight Position Bulb on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today, you will see the instructions to remove and replace the position bulb of the front headlight on a first series Opel Mokka. First, open the bon…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos