Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Opel Mokka X?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Headlight bulb

In this tutorial we can see how to replace the front headlight bulbs in the Opel Mokka X, an extremely simple and quick operation. First of all, make sure that the key is not inserted in order to operate in complete safety, then open the engine hood, locate the large cap located on the back of the headlight in question and remove it. Then disconnect the power connector, release the metal clip and remove the old bulb from the housing. At this point, all that remains is to insert the replacement, avoiding touching the glass with bare hands, and reassemble everything.

Posted on 7 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Headlamp Bulbs on an Opel Mokka
Replace the Front Headlamp Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Do you want to replace the front headlamp bulbs on your Opel Mokka? Follow these steps: open the bonnet by pulling the lever located at the bottom ri…
How to Replace the Timing Chain on the Opel Mokka?
How to Replace the Timing Chain on the Opel Mokka?
Vauxhall Mokka (2020-2026 / Mokka B) To replace the timing chain on the Opel Mokka, completely remove the engine from its housing: loosen the screws securing it to the respective mounts …
How to replace the fog light bulbs in the Opel Mokka?
How to replace the fog light bulbs in the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) In this tutorial we can see how to replace the fog light bulbs in the Opel Mokka, an extremely simple and quick operation. First of all, make sure th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos