Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Remote Battery on the Opel Mokka

Model: Vauxhall Mokka Mokka B - Years 2020-2026
Part: Key

In this guide, we will go through the steps to replace the battery in the key remote of the Opel Mokka. First, take the remote in hand and start by extracting the physical key from inside it using the small button; lever off the back cover to remove it, thus accessing the battery compartment, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type (in this case, a CR 2032 3V); insert it the right way round and secure the remote cover, completing the replacement.

Posted on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on an Opel Mokka
How to Replace the Key Battery on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) This guide shows how to replace the battery in the remote/key of an Opel Mokka. For the remote with a flip key, refer to the side with the Opel logo …
Removing the Remote Control on Opel Mokka
Removing the Remote Control on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Need to replace the key battery of an Opel Mokka? Here’s how to disassemble the key for replacement. Take your ignition remote and remove the metal k…
Replacing the Remote Control Battery on Opel Mokka
Replacing the Remote Control Battery on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today, we will show you a really simple operation that anyone can do: replacing the remote control battery on an Opel car. First, as clearly shown in…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos