Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light of the Opel Crossland X

Model: Vauxhall Crossland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

After performing the regular maintenance of your Opel Crossland X, it may happen that the service light on the instrument panel remains on. In this guide, we will explain the various steps you need to take to manually reset the light. First, get into the car and locate the two buttons "Check" and "ODO" located below the instrument panel display.

Press and hold the "Check" button while starting the car. Finally, wait for the 10-second countdown to finish and release the button.


Posted on 30 March 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on an Opel Crossland
How to Reset the Service Light on an Opel Crossland
Vauxhall Crossland X (2017-2024 / MK 1) If you have recently performed the regular service on your Opel Crossland but the service light remains on the dashboard, you need to reset it manual…
How to Reset the "Service" Light on an Opel Crossland X
How to Reset the "Service" Light on an Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) Before you begin, sit in the driver's seat of your Opel Crossland X. Start by pressing and holding the "check" button located on the instrument clust…
How to reset the tyre warning light in the Opel Crossland?
How to reset the tyre warning light in the Opel Crossland?
Vauxhall Crossland X (2017-2024 / MK 1) In this tutorial, you will see how to reset the tyre warning light in the Opel Crossland, a very simple and quick operation, to be carried out only a…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos