Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper on the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

Briefly, here are the instructions to remove and replace the rear wiper on the Opel Mokka. First, move to the rear of the vehicle and start by removing the plastic cover of the wiper; then unclip the wiper arm and gently lift it to remove it, as shown in the video.

Now, install the new rear wiper of the correct type and size; reattach and secure the wiper arm, then finally reassemble the plastic cover.


Posted on 12 July 2026 by ScegliAuto


Related tutorials

How to change the rear wiper on the Opel Mokka
How to change the rear wiper on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, see the instructions that will allow you to remove and replace the rear wiper on the Opel Mokka, as well as on the Mokka X. F…
How to replace the front wipers on the Opel Mokka X
How to replace the front wipers on the Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, see how to remove and replace the front wipers, as well as the rear one, on the Opel Mokka and Mokka X, following these simpl…
How to replace the rear windshield wiper of the Opel Mokka 2018
How to replace the rear windshield wiper of the Opel Mokka 2018
Vauxhall Mokka (2012-2019 / Mokka A) If the rear windshield wiper on your Opel Mokka first series (year 2018) is experiencing malfunctions or is too worn out, then you must replace it as…

How to Remove the Front Bumper on a Citroen C4 Picasso?

In this tutorial, see how to replace the front bumper on a Citroen C4 Picasso, a very simple and quick operation. First, open the bonnet, then locate the rivets on the upper edge of the grille and, using a flat-head screwdriver, remove them. Next, move underneath the bumper, unscrew all the fixing bolts, and proceed to remove the last screws, accessible from inside the wheel arches. At this point, grasp the bumper from one of the two ends, pull it outwards, and separate it from the chassis.

Watch the video!


by ScegliAuto

More videos