Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to enable and disable Cruise Control on the Opel Insignia B?

Model: Vauxhall Insigna - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

See other generations:
Video tutorial

On the Opel Insignia B, Cruise Control is managed using the controls on the left side of the steering wheel. To activate it, press the m button (or the button with the cruise icon).

A white light will illuminate on the instrument cluster: the system is in standby but is not yet controlling speed. At this point, drive to the desired speed (must be above 19 miles/h) and turn the dial to SET/- to memorise it. The light will turn green, and the car will maintain the set speed.

To increase or decrease speed, use the dial on RES/+ or SET/-. To temporarily deactivate it (pause), press the y button or tap the brake: the light will return to white, and the speed remains memorised. To resume, turn the dial to RES+. To completely switch off the system and clear the memorised speed, press the button again.

If the car is equipped with Adaptive Cruise Control (ACC), the procedure is similar, but the system also maintains distance from the preceding vehicle.


Posted on 28 October 2026 by ScegliAuto


Related tutorials

How to activate cruise control on the Opel Insignia
How to activate cruise control on the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Today's instructions will illustrate how to activate and operate the cruise control on the Opel Insignia in simple steps. First, get into the vehicle…
How Does the Cruise Control Work on the Opel Insignia?
How Does the Cruise Control Work on the Opel Insignia?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Below is a guide that will allow you to use the cruise control system on the Opel Insignia by following these simple steps. First, get into the vehic…
How to Use the Cruise Control in the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Today, let's discover how to activate and use the cruise control system in the Opel Insignia by following the instructions below. First, locate the c…

Other guides you may be interested in

How to reset the brake wear warning light on the Ford Transit?

To reset the brake wear warning light on the Ford Transit, first replace the worn brake pads with new replacement parts. Once the replacement is complete, disconnect the wear sensor connectors to allow them to reset. Then reconnect all the connectors to ensure they can read the new wear values. Therefore, enter the cabin and turn on the instrument panel to verify that the brake pad wear warning light has been reset.

Watch the video!


by ScegliAuto

More videos