Do it yourself
Frequently asked questions about cars and motorcycles

Turning Off the "Service" Light on an Opel Crossland X

Model: Vauxhall Crossland X MK 1 - Years 2017-2024
Part: Service warning light

Warning: The procedure does not require special equipment or experience to perform, but it is important to strictly follow the sequence of the simple instructions outlined here: 1- Ensure the vehicle is off and the ignition key is removed from the ignition. 2- Ensure no pedals are pressed. 3- Press and hold the "check" button. 4- Turn on the ignition with the vehicle's key, but do not start the engine. 5- Wait for the 10-second countdown that will appear on the display, at the end of which the message "reset completed" will confirm the reset. 6- Release the "check" button. At this point, the operation is complete.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Crossland X (2017-2024 / MK 1) How to turn off the service light on an Opel Crossland X? A very simple operation: enter the vehicle, turn on the instrument panel with the appropria…
Vauxhall Crossland X (2017-2024 / MK 1) Before you begin, sit in the driver's seat of your Opel Crossland X. Start by pressing and holding the "check" button located on the instrument clust…
Vauxhall Crossland X (2017-2024 / MK 1) To reset the service light on an Opel Crossland X, follow these steps: 1) Press and hold the "Check" button located below the instrument panel; 2) Wi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos