Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Diesel fuel filter

This tutorial explains the procedure for replacing the diesel filter on an Opel Corsa 1.3 CDTI. Before proceeding with the replacement, disconnect the inlet cable and the sensor. The latter is quite easy to disconnect: simply press the lever on the connection and pull it outwards. To extract the inlet cable, lift the blue lever located on the cable connection. After disconnecting the connections (and after collecting the purged diesel), manually unscrew the filter cap to remove it. After inserting a new filter, simply screw the cap back on and reconnect the previously disconnected connections.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the fuel filter on Opel Corsa
Replacing the fuel filter on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replacing the fuel filter on an Opel Corsa. We raise the front hood to get to the diesel filter. We remove the cover that covers the air filter and t…
How to Remove the Diesel Filter from an Opel Corsa
How to Remove the Diesel Filter from an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Lift the bonnet; remove the soundproofing panel from the engine and locate the diesel filter (as shown in the video). Using a socket wrench, unscrew …
How to Replace the Diesel Filter on an Opel Corsa
How to Replace the Diesel Filter on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Lift the bonnet or raise the car on a column lift or suitable jack (if necessary). Locate the diesel filter (as shown in the video). Use a socket spa…

How to Remove the Tailgate Handle on a Nissan Qashqai

Follow these steps to remove the tailgate handle on a Nissan Qashqai to replace the number plate bulbs. First, open the rear tailgate of the car, then unscrew the screws on the plastic trim of the tailgate using a screwdriver (remove the plastic rivets). Detach the plastic trim from the tailgate, unscrew the securing bolts of the external handle with a screwdriver. Finally, remove the tailgate handle by hand. Take the new part and disassemble the number plate light. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos