Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to replace the diesel filter on Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Diesel filter
Operation: How to replace the diesel filter on Opel Corsa

Let's see how to change the diesel filter present on an Opel Corsa: we raise the front hood / the car on a column bridge or a special jack (if necessary), we identify the diesel filter (as in the video). With a socket wrench we unscrew the pins that tighten the filter to the car frame (we disconnect the circulation and electrical tubes). We remove the filter container from the car (replace it with a new one). Finally we reassemble the diesel filter to the attached metal clamp (we connect pipes and electrical cables) and tighten the appropriate pins. We close the front hood.


Posted on 6 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2014-2019 - What is the position of the fuel filter of the Opel Corsa? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos