Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car Radio Removal Instructions

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Car stereo

To remove the car radio, you need the appropriate extractors (you can also try using high-strength steel wire): these are two U-shaped steel wire hooks with ends shaped to release the locking springs of the radio. On the sides of the radio, there are small holes (two on each side) into which the extractors should be inserted: once inserted, the radio's fixing springs will release, and by pressing the hooks outward, you can extract the radio from its slot, disconnecting the antenna plug and the main power plug.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Aftermarket Car Radio
Installation of Aftermarket Car Radio
Vauxhall Corsa (2006-2014 / Corsa D) The first operation is to remove the original car radio: you will need extraction keys to insert into the appropriate holes to release the fixing spr…
How to Remove the Radio from an Opel Corsa
How to Remove the Radio from an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Do you want to remove the radio from your Opel Corsa and don't know how to proceed? Let's see in this video how to take out the original stereo. Use …
Replacing the Car Radio with a New Model
Replacing the Car Radio with a New Model
Vauxhall Corsa (2006-2014 / Corsa D) If you are not satisfied with the standard car radio, you can replace it with a more appealing model. To remove the radio from the console, insert th…

How to Remove the Bonnet on a Smart Fortwo

To open the front bumper of the Smart Fortwo for bulb maintenance, follow these steps: open the plastic levers located at the sides of the front grille with your hands. Once the front plastic is free, lift it upwards with your hands, then remove it from the bodywork as shown in the video. After removing the mentioned piece, replace the damaged bulbs. To reassemble, secure the plastic cover at the front of the car and then at the bottom. Finally, close the bonnet release levers with your hands.

Watch the video!


by ScegliAuto

More videos