Do it yourself
Frequently asked questions about cars and motorcycles

How to Reprogram the Key of an Opel Agila

Model: Vauxhall Agila Agila A - Years 2000-2007
Part: Key

Reprogramming the key of an Opel Agila is a delicate operation, and it is advisable to rely on a professional. However, if you have a bit of knowledge in the field and want to try, all you need is a transponder programmer like the one in the video (KD900). Connect it to the OBD port of your Opel Zafira and insert the key to be programmed into the ignition barrel. The first step is to retrieve the "pin code". To do this, go to "obd operations", scroll down the menu to "opel" and select the model "zafira". Then click on "read pin code" and afterwards on "extract from ecu". Follow the instructions until the programmer successfully retrieves the "pin code". After extraction, the device will give you the option to "add key". Click on it and follow the instructions that appear on the programmer's screen. If everything goes well, simply insert the key and start the car.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Agila (2008-2015 / Agila B) Before you can start, exit the cabin of your Opel Agila and head to the rear of the vehicle. Begin by opening the boot. Next, unscrew and remove the …
Vauxhall Agila (2008-2015 / Agila B) In this short video tutorial, learn how to replace the battery in a second-generation Opel Agila, produced from 2008 to 2015. First, open the bonnet.…
Vauxhall Agila (2000-2007 / Agila A) In this video, you will learn how to change the front headlamp bulb on an Opel Agila. First, detach the air intake piece to gain easy access to the h…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos