Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program a new remote control in the Opel Agila?

Model: Vauxhall Agila Agila B - Years 2008-2015
Part: Key

In this tutorial we can see how to program a new remote control in the Opel Agila, a very simple and quick operation. To do this, we will need a key that is already working. We start by opening the driver's door, then we insert the new key, turn on and off the instrument panel. We then press the indicated button three times in a row, reinsert the key, turn on and off the panel again, press the door unlock button on the new remote control and repeat this last step. Finally, we verify that the remote control is functioning correctly.

Posted on 14 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery for an Opel Agila
How to Replace the Key Fob Battery for an Opel Agila
Vauxhall Agila (2008-2015 / Agila B) A small flat-head screwdriver is all you need to replace the battery in the remote control of an Opel Agila. Take the remote and first insert the tip…
How to Replace the Engine Air Filter on an Opel Agila B 2012
How to Replace the Engine Air Filter on an Opel Agila B 2012
Vauxhall Agila (2008-2015 / Agila B) To correctly and safely replace the engine air filter on your Opel Agila B (2012), follow the procedure described in this guide. First, park your Ope…
How to Replace the Rear Light on an Opel Agila
How to Replace the Rear Light on an Opel Agila
Vauxhall Agila (2008-2015 / Agila B) Before starting, open the boot of your Opel Agila. Begin by unscrewing and removing the screws that secure the rear light to the vehicle. This will f…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos