Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Crankshaft Position Sensor on an Opel Corsa D 1.0 Petrol

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Crankshaft position sensor

In this video, we will see how to remove the crankshaft position sensor on an Opel Corsa D 1.0 Petrol in simple and quick steps. To access the sensor, you will need to lift the vehicle, even if just on the front side; then locate the sensor near the front driveshaft, as shown in the video. The sensor is secured with two screws that need to be unscrewed with a socket spanner; once unscrewed, disconnect its electrical connector. Finally, remove the sensor and replace it with the new one, applying the reverse procedure for reassembly!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Crankshaft Sensor in an Opel Corsa?
How to Remove the Crankshaft Sensor in an Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial, you will see how to remove the crankshaft sensor in an Opel Corsa C, a very simple operation despite the limited space available. F…
Replacing the Engine Speed Sensor
Replacing the Engine Speed Sensor
Vauxhall Corsa (2006-2014 / Corsa D) A malfunctioning engine speed sensor can cause the engine to stall (especially at low revs) with difficulty restarting immediately after stalling; it…
Where is the crankshaft position sensor located in the Opel Corsa?
Where is the crankshaft position sensor located in the Opel Corsa?
Vauxhall Corsa (1993-2000 / Corsa B) In this video, you can see where the crankshaft position sensor is located in the Opel Corsa, useful if you need to replace it due to a fault. As sho…

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the engine speed sensor located on the Opel Corsa? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos