Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on an Opel Astra

Model: Vauxhall Astra Astra K - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Rear bumper

See other generations:
Video tutorial

Unscrew the screws in the wheel arches, then remove the two rear lights: to do this, open the boot lid, remove the inner side panel, and access the back of the lights by unscrewing the fixing screw. Once the lights are removed from their housing, disconnect the connectors.

Now, work underneath the bumper by unscrewing all the screws that secure it from below. Unscrew the two bolts located under the number plate, and you're done.

At this point, you can gently remove the bumper by pulling it out from its housing in all parts. Good luck!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper from an Opel Astra
Removing the Rear Bumper from an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following instructions will guide you on how to remove and replace the rear bumper of an Opel Astra in simple steps. First, open the rear tailgat…
Removing the Rear Bumper of the Opel Astra
Removing the Rear Bumper of the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) This guide briefly outlines the steps to remove and replace the rear bumper of the Opel Astra. First, open the boot lid and begin unscrewing all the …
Removing the Rear Bumper on an Opel Astra Sw (J)
Removing the Rear Bumper on an Opel Astra Sw (J)
Vauxhall Astra (2009-2016 / Astra J) In this video, we will see how to remove the rear bumper on an Opel Astra J, in station wagon version. First, open the boot lid and start by unscrewi…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos