Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wiper Switch/Relay on the Opel Combo Van

Model: Vauxhall Combo Combo C, MK 3 - Years 2001-2011

In this video tutorial, we will see the main steps to dismantle and replace the relay or the wiper switch on the Opel Combo Van. First, get in the vehicle and start by removing the plastic cover found under the instrument panel; then remove the plastic panel located under the steering wheel, and then take out the fastening pins of the wiper switch, as shown in the video. At this point, you can replace it with the new one of the correct type; then reassemble everything, applying the reverse procedure!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Opel Combo?
Where are the fuses located in the Opel Combo?
Vauxhall Combo (2012-2018 / Combo D, MK 4) In the Opel Combo, the fuses are contained within dedicated fuse boxes installed in the vehicle: this type of vehicle has two boxes for holding the f…
Where are the fuses of the Opel Combo located?
Where are the fuses of the Opel Combo located?
Vauxhall Combo (2019-2026 / Combo E, MK 5) Each fuse of the Opel Combo is located inside one of the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it will be p…
How do you reset the service light on a 2011 Opel Combo?
How do you reset the service light on a 2011 Opel Combo?
Vauxhall Combo (2001-2011 / Combo C, MK 3) Ok, you want to turn off that annoying service light, here's how you can do it. Sit in the driver's seat, close all the doors, and turn the key to ON…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos