Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Headlamp Bulb

Model: Vauxhall Zafira Zafira A, MK 1, T98 - Years 1999-2005
Part: Tail light bulb

The following guide shows how to change the bulbs of the rear lights of your car. To do this, you need to have a spanner and a new bulb on hand. After confirming that the bulb is not working, proceed to remove the headlamp. Open the boot and use a spanner to unscrew the screws that attach the black plastic of the headlamp to the frame. Once the two screws are removed, carefully extract the headlamp and disconnect the plastic connector that joins the wires to the headlamp by lifting the plastic tab. Insert the new bulb, ensuring that the two protrusions on the base fit into the appropriate slots.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Headlight Bulbs on an Opel Zafira
Replacing Rear Headlight Bulbs on an Opel Zafira
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) Replace the damaged bulbs in the rear headlight of an Opel Zafira. Open the boot lid and remove the cover cap on the side. Unscrew the plastic retain…
How to replace the front headlamp bulb on an Opel Zafira
How to replace the front headlamp bulb on an Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) Before starting, open the front bonnet of your Opel Zafira. Begin by unscrewing and removing the rear cover of the blown bulb of the front headlamp. …
Replacing Dipped Headlight Bulbs on Opel Zafira
Replacing Dipped Headlight Bulbs on Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) How to replace the front bulbs on a Zafira? First, lift the front bonnet of the car and locate the back of the headlamp: you will find a cover cap. R…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos